Tugas ccna2 Lab 8.4.2 planning a backup solution

Lab 8.4.2 planning a backup solution

step 1: choose the media and backup hardware

Equipment / media	price	quality
USB and solid-state drives	$30-$90	medium
fireWire drives	$180	best
CD-RW and DVD+RW/-RW drives	$100	medium

Step 2: design a backup plan and procedure

a.       Describe the equipment recommended and explain why you selected this equipment

Saya memilih media di atas Karena saya melihat dari segi kapasitas dan segi ekonomis

b.      Describe location of the equipment in the network and the network link speeds to the equipment

c.       Describe the backup media to be used and also explain why you selected this media

d.      Describe the backup schedule

e.       Describe the backup and restore procedure, including what kind of backup (Normal, differential, incremental), how it will be tested what kind of maintenance the equipment requires. How tapes will be labeled and where tapes that have been backed up will be stored. When backups need to be restored, what is the procedure for a file a folder a driver (use extra sheets it necessary)

Tugas CCNA 2 Lab 8.3.2 conducting a Network capture with wireshark

Lab 8.3.2 conducting a Network capture with wireshark

Step 1: install and launch Wireshark

Step 2: select an interface to  use for capturing pakets

Step 3 : Analysyze web trafict information (optional)

a.       The conection to the google server with a query to the DNS server to lookup the server IP address. The destination server IP address will most likely start with 64.x.x.x what is the source and destination of the first packet sent to the google server?

Source: 192.168.1.103

Destination: 65.24.7.3

b.      Open another browser window and go to the ARIN who is database http://www.arin .net/whois/ or use another whois lookup tool and enter thr IP address of the destination server. To what organization is this IP address assigned? 192.168.1.103

c.       What are the protocols is used to establish the connection to the web server and deliver the web page to your local host? TCP

d.      What is the color used to establish the connection to the server and deliver the web page to your local host? hijau

e.       What is the color used to highlight the traffic between your host and the google web server? gray

Step 5: filter a network capture

a.       Open a command prompt window by clicking start > all programs > run and typing cmd.

b.      Ping a host IP address on your local network and observer? ICMP

c.       When icmp is typed in the filter text box what kind of raffic is was displayed? Ketika kita menge-ping host IP address yang ada di jaringan local kita

d.      Click the filter: Expression button on the wireshark eindow. Scroll down the list and view the filter possibilities there. Are TCP, HTTP,ARP and other protocols listed? Ya ada

Step 6:reflection

a.       There are hundreads of filters listed in the filter: expression option. It may be possible that, in a large network , there would be enormounts and many different types of traffic. Which three filters in the long list do you think might be most useful to a network administrator

b.      Is wreshark a tool for out of band or in band network monitoring

Explain your answare

Tugas CCNA 2 Lab 8.3.1 Interpreting a service level agreement

Lab 8.3.1 Interpreting a service level agreement

Step 1: review typical customer needs

Step 2: Analyze a sample SLA and identify key components

a. Read over the sample SLA that follows and answer these questions regarding content, ISP responsibilities, and customer requirements.

b. According to this agreement, can the ISP be held liable for damage to equipment owned by the customer [Client] or data loss that occurs due to accidental actions by ISP vendor staff or other persons? bisa

c.What are some examples of One Time Services included in the SLA? E-mail service, electronic interchange, online accounting, secure remote workerr support, remote indtrumentation and control system, and backup and recovery service.

d. What are some examples of On going Services included in the SLA? E-mail service, online acounting e. When will regular downtime maintenance be scheduled and how many business days notice must the ISP give of any scheduled downtime? Banyak jam dalam satu hari dan banyak hari dalam senulan.What does the ISP’s network monitoring system do when an error condition is detected? What is the stated availability of the Systems Administrators in the event of a system failure? What is “usage monitoring” and how does the ISP provide this service? Dengan memantau kerja sistem

f. Regarding problem severity and ISP response time, what is the difference in response between “Level 1 – normal business hours” and “Level 3 – normal business hours”? pada level satu baru mendeteksi problem dan pada level 3 sudah ada pengontrolan

g. On what factors are the penalties for service outages based? Provides an estimate for the cost to the customer for a service outage for each of the services the customer wants covered by an SLA.

Tugas CCNA 2 Lab 7.3.3.b Creating Primari and secondary forward lookup zones

Lab 7.3.3.b Creating Primari and secondary forward lookup zones

Step 1: Create a primary forward lookup zone on windows

Step 2: add a host record to the primary forward lookup zone

Step 3: create a secondary forward lookup zone

Step 4: reflection

What is the major benefit of having a primary and secondary DNS server in a zone?

Primary DNS server: computer menjalankan fungsi name server baerdasarkan data base yang dimilikinya

Secondary DNS server: computer menjalankan fungsi name server berdasarkan database yang diambil dari ptimary server

Tugas CCNA 2 Lab 7.3.3 a Examining Cached DNS information on a windows DNS

Lab 7.3.3 a Examining Cached DNS information on a windows DNS

server

Step 1: use the windows server administrative tool

Step 2: perform a DNS lookup

Step 3: Examine the chaced DNS entries

Step 4: reflection

a.       The DNS server had to do a query to the cisco.com domain name servers to resolve name (www.cisco.com) to an IP address what do you think would happen the next time this website is visited again a few minutes? Maka aka nada ns3 karena alamat www.cisco.com diakses untuk yang ketiga kalinya

b.      What would happen if there are no requests for this website for a longer period of time? Tidak akan terjadi apa-apa record-nya tidak akan bertamba

CCNA Discovery 3 Module 3 Exam Answers Version 4.0

CCNA Discovery 3 Module 3 Exam Answers Version 4.0

1.
Refer to the exhibit. What two statements can be concluded from the information that is shown in the exhibit? (Choose two.)
• All ports that are listed in the exhibit are access ports.
• ARP requests from Host1 will be forwarded to Host2.
• Attaching Host1 to port 3 will automatically allow communication between both hosts.
• The default gateway for each host must be changed to 192.168.3.250/28 to allow communication between both hosts.
• A router connected to the switch is needed to forward traffic between the hosts.

2.     

A router is configured to connect to a trunked uplink as shown in the exhibit. A packet is received on the FastEthernet 0/1 physical interface from VLAN 10. The packet destination address is 192.168.1.120. What will the router do with this packet?
• The router will forward the packet out interface FastEthernet 0/1.1 tagged for VLAN 10.
• The router will forward the packet out interface FastEthernet 0/1.2 tagged for VLAN 60.
• The router will forward the packet out interface FastEthernet 0/1.3 tagged for VLAN 60.
• The router will forward the packet out interface FastEthernet 0/1.3 tagged for VLAN 120.
• The router will not process the packet since the source and destination are on the same subnet.
• The router will drop the packet since no network that includes the source address is attached to the router.

3.      The information contained in a BPDU is used for which two purposes? (Choose two.)
• to prevent loops by sharing bridging tables between connected switches
• to set the duplex mode of a redundant link
• to determine the shortest path to the root bridge
• to determine which ports will forward frames as part of the spanning tree
• to activate looped paths throughout the network

4.      A router has two serial interfaces and two Fast Ethernet interfaces. This router must be connected to a WAN link and to a switch that supports four VLANs. How can this be accomplished in the most efficient and cost-effective manner to support inter-VLAN routing between the four VLANs?
• Connect a smaller router to the serial interface to handle the inter-VLAN traffic.
• Add two additional Fast Ethernet interfaces to the router to allow one VLAN per interface.
• Connect a trunked uplink from the switch to one Fast Ethernet interface on the router and create logical subinterfaces for each VLAN.
• Use serial-to-Fast Ethernet transceivers to connect two of the VLANs to the serial ports on the router. Support the other two VLANs directly to the available FastEthernet ports.

5.      When are MAC addresses removed from the CAM table?
• at regular 30 second intervals
• when a broadcast packet is received
• when the IP Address of a host is changed
• after they have been idle for a certain period of time

6.     

Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches. Which two are possible reasons for this? (Choose two.)
• Switch2 is in transparent mode.
• Switch1 is in client mode.
• Switch1 is using VTP version 1 and Switch2 is using VTP version 2.
• Switch2 is in server mode.
• Switch1 is in a different management domain.
• Switch1 has no VLANs.

7.      Which three must be used when a router interface is configured for VLAN trunking? (Choose three.)
• one subinterface per VLAN
• one physical interface for each subinterface
• one IP network or subnetwork for each subinterface
• one trunked link per VLAN
• a management domain for each subinterface
• a compatible trunking protocol encapsulation for each subinterface

8.     

Refer to the exhibit. The switches are connected with trunks within the same VTP management domain. Each switch is labeled with its VTP mode. A new VLAN is added to Switch3. This VLAN does not show up on the other switches. What is the reason for this?
• VLANs cannot be created on transparent mode switches.
• Server mode switches neither listen to nor forward VTP messages from transparent mode switches.
• VLANs created on transparent mode switches are not included in VTP advertisements.
• There are no ports assigned to the new VLAN on the other switches.
• Transparent mode switches do not forward VTP advertisements.

9.      Which two criteria are used by STP to select a root bridge? (Choose two.)
• memory size
• bridge priority
• switching speed
• number of ports
• base MAC address
• switch location

10.  Which three steps should be taken before moving a Catalyst switch to a new VTP management domain? (Choose three.)
• Reboot the switch.
• Reset the VTP counters to allow the switch to synchronize with the other switches in the domain.
• Download the VTP database from the VTP server in the new domain.
• Configure the VTP server in the domain to recognize the BID of the new switch.
• Select the correct VTP mode and version.
• Configure the switch with the name of the new management domain.

11.  Which two items will prevent broadcasts from being sent throughout the network? (Choose two.)
• bridges
• routers
• switches
• VLANs
• hubs

12.  Which two characteristics describe a port in the STP blocking state? (Choose two.)
• provides port security
• displays a steady green light
• learns MAC addresses as BPDUs are processed
• discards data frames received from the attached segment
• receives BPDUs and directs them to the system module

13.  What is the first step in the process of convergence in a spanning tree topology?
• election of the root bridge
• determination of the designated port for each segment
• blocking of the non-designated ports
• selection of the designated trunk port
• activation of the root port for each segment

14.  In which STP state does a switch port transmit user data and learn MAC addresses?
• blocking
• learning
• disabling
• listening
• forwarding

15.  What is the purpose of VTP?
• maintaining consistency in VLAN configuration across the network
• routing frames from one VLAN to another
• routing the frames along the best path between switches
• tagging user data frames with VLAN membership information
• distributing BPDUs to maintain loop-free switched paths

16.  Which statement best describes adaptive cut-through switching?
• The switch initially forwards all traffic using cut-through switching and then changes to store-and-forward switching if errors exceed a threshold value.
• The switch initially forwards all traffic using cut-through switching and then changes to fast-forward switching if errors exceed a threshold value.
• The switch initially forwards all traffic using cut-through switching and then temporarily disables the port if errors exceed a threshold value.
• The switch initially forwards all traffic using store-and-forward switching and then changes to cut-through switching if errors exceed a threshold value.

17.  Using STP, how long does it take for a switch port to go from the blocking state to the forwarding state?
• 2 seconds
• 15 seconds
• 20 seconds
• 50 seconds

18.

Refer to the exhibit. The switches are interconnected by trunked links and are configured for VTP as shown. A new VLAN is added to Switch1. Which three actions will occur? (Choose three.)
• Switch1 will not add the VLAN to its database and will pass the update to Switch 2.
• Switch2 will add the VLAN to its database and pass the update to Switch3.
• Switch3 will pass the VTP update to Switch4.
• Switch3 will add the VLAN to its database.
• Switch4 will add the VLAN to its database.
• Switch4 will not receive the update.

19.  Which Catalyst feature causes a switch port to enter the spanning-tree forwarding state immediately?
• backbonefast
• uplinkfast
• portfast
• rapid spanning tree

20.
Refer to the exhibit. Which set of commands would be used on the router to provide communication between the two hosts connected to the switch?
• Router(config)# interface vlan 2
Router(config-if)# ip address 192.168.2.1 255.255.255.0
Router(config-if)# no shutdown
Router(config)# interface vlan 3
Router(config-if)# ip address 192.168.3.1 255.255.255.0
Router(config-if)# no shutdown
• Router(config)# interface fastethernet 0/0
Router(config-if)# no shutdown
Router(config-if)# interface fastethernet 0/0.2
Router(config-subif)# encapsulation dot1q 2
Router(config-subif)# ip address 192.168.2.1 255.255.255.0
Router(config-if)# interface fastethernet 0/0.3
Router(config-subif)# encapsulation dot1q 3
Router(config-subif)# ip address 192.168.3.1 255.255.255.0
• Router(config)# interface vlan 2
Router(config-if)# switchport mode trunk dot1q
Router(config)# interface vlan 3
Router(config-if)# switchport mode trunk dot1q
• Router(config)# interface fastethernet 0/0
Router(config-if)# mode trunk dot1q 2 3
Router(config-if)# ip address 192.168.2.1 255.255.255.0v

 

CCNA Discovery 3 Module 2 Exam Answers Version 4.0

CCNA Discovery 3 Module 2 Exam Answers Version 4.0

1. What type of connection point is a point of presence (POP)?
• between a client and a host
• between two local networks
• between a computer and a switch
• between an ISP and an Enterprise network
Jawab: • between an ISP and an Enterprise network

2. A network administrator needs to configure Telnet access to a router. Which group of commandsenable Telnet access to the router?
• Router(config)# enable password class
Router(config)# line con 0
Router(config-line)# login
Router(config-line)# password cisco
• Router(config)# ip host 192.168.1.1 NewYork
Router(config)# enable password cisco
• Router(config)# line aux 0
Router(config-line)# login
Router(config-line)# password cisco
• Router(config)# enable password class
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password cisco
Jawab: • Router(config)# enable password class
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password cisco

3. Which two types of information should be included in a business continuity plan? (Choose two.)
• maintenance time periods
• intrusion monitoring records
• offsite data storage procedures
• alternate IT processing locations*
• problem resolution escalation steps
Jawab: • alternate IT processing locations*
4. Which two router parameters can be set from interface configuration mode? (Choose two.)
• IP address
• Telnet password
• hostname
• console password
• subnet mask
• enable secret password
Jawab: • IP address , • subnet mask
5. Which two devices protect a corporate network against malicious attacks at the enterprise edge ?(Choose two.)
• demarc
• IP security (IPSec)
• Data Service Unit (DSU)
• intrusion prevention system (IPS)
• intrusion detection system (IDS)
Jawab: • intrusion prevention system (IPS)
• intrusion detection system (IDS)

6. Which three steps must be performed to remove all VLAN information from a switch but retain therest of the configuration? (Choose three.)
• Remove all VLAN associations from the interfaces.
• Remove the 802.1q encapsulation from the interfac
• Issue the command copy start run.
• Issue the command delete flash:vlan.dat.
• Issue the command erase start.
• Reload the switch.
Jawab: • Issue the command delete flash:vlan.dat.
• Issue the command erase start.
• Reload the switch.
7. What is the demarcation?
• physical point where the ISP responsibilty ends and the customer responsibilty begins
• physical location where all server farm connections meet before being distributed into the Core
• point of entry for outside attacks and is often vulnerable
• point of entry for all Access Layer connections from the Distribution Layer devices
Jawab: • physical point where the ISP responsibilty ends and the customer responsibilty begins
8. Which device is responsible for moving packets between multiple network segments?
• router
• switch
• CSU/DSU
• IDS device
Jawab: • router
10. What information can an administrator learn using the show version command?
• Cisco IOS filename
• configured routing protocol
• status of each interface
• IP addresses of all interfaces
Jawab: • Cisco IOS filename
11. Which two situations require a network administrator to use out-of-band management to change arouter configuration? (Choose two.)
• Network links to the router are down.
• No Telnet password has been configured on the router.
• The administrator can only connect to the router using SSH.
• The network interfaces of the router are not configured with IP addresses.
• Company security policy requires that only HTTPS be used to connect to routers.
Jawab: • Network links to the router are down.• The network interfaces of the router are not configured with IP addresses.
12. It is crucial that network administrators be able to examine and configure network devices fromtheir homes. Which two approaches allow this connectivity without increasing vulnerability to externalattacks? (Choose two.)
• Configure a special link at the POP to allow external entry from the home computer.
• Set up VPN access between the home computer and the network.
• Install a cable modem in the home to link to the network.
• Configure ACLs on the edge routers that allow only authorized users to access management portson network devices.
• Configure a server in the DMZ with a special username and password to allow external access.
Jawab: • Set up VPN access between the home computer and the network.

• Configure ACLs on the edge routers that allow only authorized users to access management portson network devices.

13. A network administrator must define specific business processes to implement if a catastrophicdisaster prevents a company from performing daily business routines. Which portion of the networkdocumentation is the administrator defining?
• business security plan
• business continuity plan
• network solvency plan
• service level agreement
• network maintenance plan
Jawab: • business continuity plan
14. A DoS attack crippled the daily operations of a large company for 8 hours. Which two optionscould be implemented by the network administrator to possibly prevent such an attack in the future?(Choose two.)
• install security devices with IDS and IPS at the enterprise edge
• reset all user passwords every 30 days
• filter packets based on IP address, traffic pattern, and protocol
• deny external workers VPN access to internal resources
• ensure critical devices are physically secure and placed behind the demarc
Jawab:

• install security devices with IDS and IPS at the enterprise edge

• filter packets based on IP address, traffic pattern, and protocol
15. A network manager wants to have processes in place to ensure that network upgrades do not affectbusiness operations. What will the network manager create for this purpose?
• business security plan
• business continuity plan
• service level agreement
• network maintenance plan
Jawab:

• network maintenance plan
16. An investment company has multiple servers that hold mission critical datThey are worried that ifsomething happens to these servers, they will lose this valuable information. Which type of plan isneeded for this company to help minimize loss in the event of a server crash?
• business security
• business continuity
• network maintenance
• service level agreement
Jawab:

• business continuity
17. When searching for information about authentication methods and usernames of companypersonnel, where can a network administrator look?
• Business Continuity Plan
• Business Security Plan
• Network Maintenance Plan
• Service Level Agreement
Jawab:

• Business Security Plan
18. Refer to the exhibit. Which statement is true about port Fa5/1?
• When a violation is detected, the port will log the information to a syslog server.
• When a violation is detected, the port will go into err-disable mod
• There have been 11 security violations since the last reloa
• The port is currently in the shutdown state.

Jawab:

• The port is currently in the shutdown state.

CCNA Discovery 3 Module 1 Exam Answers Version 4.0

CCNA Discovery 3 Module 1 Exam Answers Version 4.0

1. What can be found at the enterprise edge?
• Internet, VPN, and WAN modules
• Internet, PSTN, and WAN services
• server farms and network management
• campus infrastructure, including access layer devices
Jawab: • Internet, VPN, and WAN modules

2. In which functional area of the Cisco Enterprise Architecture should IDS and IPS be located to detect
• and prevent services from accessing hosts?
• Enterprise Campus
• Edge Distribution
• Enterprise Edge
• Service Provider Edge
Jawab: Enterprise Edge

3. A business consultant must use Internet websites to research a report on the e-business strategies of several firms and then electronically deliver the report to a group of clients in cities throughout the world. Which two teleworker tools can the consultant use to accomplish this project? (Choose two.)
• VoIP
• VPN
• HTTP
• Telnet
• email
Jawab: HTTP ,  email

4. Which two measures help ensure that a hardware problem does not cause an outage in an enterprise LAN that supports mission critical services? (Choose two.)
• providing failover capability
• installing redundant power supplies
• purchasing more bandwidth from the ISP
• implementing broadcast containment with VLANs
• installing routers that can handle a greater amount of throughput
Jawab: • providing failover capability
• installing redundant power supplies

5. Which task would typically only require services located at the access layer of the hierarchical design model?
• connecting to the corporate web server to update sales figures
• using a VPN from home to send data to the main office servers
• printing a meeting agenda on a local departmental network printer
• placing a VoIP call to a business associate in another country
• responding to an e-mail from a co-worker in another department
Jawab: • printing a meeting agenda on a local departmental network printer

6. How does a VPN work to support remote user productivity?
• It uses SSL to encrypt remote user logins to the corporate intranet.
• It uses secure Telnet for remote user connections to internal network devices.
• It creates a virtual circuit that allows real-time communications between any two Internet endpoints.
• It uses encapsulation to create a secure tunnel for transmission of data across non-secure networks.****
Jawab: • It uses encapsulation to create a secure tunnel for transmission of data across non-secure networks.****

7. A remote user needs to access a networking device on the internal network of the company. The transactions between the remote user and the device must be secure. Which protocol enables this to happen securely?
• HTTP
• SSH
• Telnet
• FTP
Jawab: • SSH

8. What does VoIP provide to telecommuters?
• high-quality, live-video presentations
• real-time voice communications over the Internet
• ability to share desktop applications simultaneously
• secure, encrypted data transmissions through the Internet
Jawab: • real-time voice communications over the Internet

9. Which functional component of the Cisco Enterprise Architecture is responsible for hosting internal servers?
• enterprise campus
• enterprise edge
• service provider edge
• building distribution
Jawab: • enterprise campus

10. What is the purpose of the Cisco Enterprise Architecture?
• remove the three-layer hierarchical model and use a flat network approach
• divide the network into functional components while still maintaining the concept of Core, Distribution, and Access Layers
• provide services and functionality to the core layer by grouping various components into a single
• component located in the access layer
• reduce overall network traffic by grouping server farms, the management server, corporate intranet, and e-commerce routers in the same layer
Jawab: • divide the network into functional components while still maintaining the concept of Core, Distribution, and Access Layers

11. Which two solutions would an enterprise IT department use to facilitate secure intranet access for remote workers? (Choose two.)
• VPN
• NAT
• user authentication
• client firewall software
• packet sniffing
Jawab: • VPN , • user authentication

12. Which statement describes the difference between an enterprise WAN and an enterprise extranet?
• An enterprise WAN is designed to interconnect local LANs, while an enterprise extranet is designed to interconnect remote branch offices.
• An enterprise WAN is designed to interconnect branch offices, while an enterprise extranet is designed to give access to external business partners.
• An enterprise WAN is designed to provide remote access for its teleworkers, while an enterprise extranet is designed to provide Internet connectivity for the enterprise.
• An enterprise WAN is designed to provide Internet connectivity for the enterprise, while an enterprise extranet is designed to provide remote access to the enterprise network for teleworkers.
Jawab: • An enterprise WAN is designed to interconnect branch offices, while an enterprise extranet is designed to give access to external business partners.

13. Why would a network administrator want to limit the size of failure domains when designing a network?
• reduces the effect of Ethernet collisions
• reduces the impact of a key device or service failure
• reduces the impact of Internet congestion on critical traffic
• reduces the impact of blocking broadcast packets at the edge of the local network
Jawab: • reduces the impact of a key device or service failure

14. What is the main purpose of the Access Layer in a hierarchically designed network?
• performs routing and packet manipulation
• supplies redundancy and failover protection
• provides a high-speed, low-latency backbone
• serves as a network connection point for end-user devices
Jawab: • serves as a network connection point for end-user devices

15. Which three functions are performed at the Distribution Layer of the hierarchical network model? (Choose three.)
• forwards traffic that is destined for other networks
• isolates network problems to prevent them from affecting the Core Layer
• allows end users to access the local network
• provides a connection point for separate local networks
• transports large amounts of data between different geographic sites
• forwards traffic to other hosts on the same logical network
Jawab: • forwards traffic that is destined for other networks
• isolates network problems to prevent them from affecting the Core           Layer

• provides a connection point for separate local networks

16. What is a benefit of having an extranet?
• It provides web-like access to company information for employees only.
• It limits access to corporate information to secure VPN or remote access connections only.
• It allows customers and partners to access company information by connecting to a public web server.
• It allows suppliers and contractors to access confidential internal information using controlled external connections.
Jawab: • It allows suppliers and contractors to access confidential internal information using controlled external connections.

17. What are two important characteristics or functions of devices at the Enterprise Edge? (Choose two.)
• providing Internet, telephone, and WAN services to the enterprise network
• providing a connection point for end-user devices to the enterprise network
• providing high-speed backbone connectivity with redundant connections
• providing intrusion detection and intrusion prevention to protect the network against malicious activity
• providing packet inspection to determine if incoming packets should be allowed on the enterprise network
Jawab: • providing intrusion detection and intrusion prevention to protect the network against malicious activity
• providing packet inspection to determine if incoming packets should be allowed on the enterprise network

18. Why is TCP the preferred Layer 4 protocol for transmitting data files?
• TCP is more reliable than UDP because it requires lost packets to be retransmitted.
• TCP requires less processing by the source and destination hosts than UDP.
• UDP introduces delays that degrade the quality of the data applications.
• TCP ensures fast delivery because it does not require sequencing or acknowlegements.
Jawab: • TCP is more reliable than UDP because it requires lost packets to be retransmitted.

19. The ABC Corporation implements the network for its new headquarters using the Cisco Enterprise Architecture. The network administrator wants to filter the traffic from and to the outside world. Where should the administrator deploy a firewall device?
• server farm
• enterprise edge
• enterprise campus
• service provider edge
Jawab: • enterprise edge

20. Which two statements are reasons why UDP is used for voice and video traffic instead of TCP?(Choose two.)
• TCP requires all data packets to be delivered for the data to be usable.
• The acknowledgment process of TCP introduces delays that break the streams of data.
• UDP does not have mechanisms for retransmitting lost packets.
• UDP tolerates delays and compensates for them.
• TCP is a connectionless protocol that provides end-to-end reliability.
• UDP is a connection-oriented protocol that provides end-to-end reliability.

Jawab: • The acknowledgment process of TCP introduces delays that break the streams of data.
• UDP does not have mechanisms for retransmitting lost packets.

Tugas CCNA 2 Lab 7.3.1 Editing the HOSTS file in windows

Lab 7.3.1 Editing the HOSTS file in windows

Step 1: locate the Hosts file in windows

Step 2: edit the Hosts file

Step 3: test the new name mapping

Step 4: reflection

a.       Which other files are located in the \ETC folder with the HOSTS file?

·         Pemetaan IP

·         Host name

·         Pemetaan web server

b.      Which character is used to comment out description text in the HOSTS file? Menggunakan tanda ‘#’ untuk membuat komentar deskripsi

Tugas CCNA 2 Lab 6.2.5 Configuring BGP with Default Routing

Lab 6.2.5 Configuring BGP with Default Routing

Step 1: Configure basic information on each router

Step 2: Configure the default and static routes

Step 3: Configure BGP on both ISP routers

Step 4: View the Routing Tables

a.    ISP2#show ip route

1)         Is network 192.168.1.0 in the routing table of ISP2? Ya ada

2)         What letter is at the left of the entry for 192.168.1.0? ‘B’

3)         What does the letter mean?

4)         Is network 192.168.100.0 in the routing table? Ya ada

5)         Which router advertised network 192.168.1.0? 172.16.1.1

b.    ISP1#show ip route

1)         What network(s) did ISP1 learn from ISP2? 172.16.1.2

2)         How did ISP1 learn about network 192.168.1.0? melalui 10.10.10.1

3)         Will ISP1 advertise any networks to the customer router? Ya akan

c. CR#show ip route

1)         Why are networks 192.168.100.0 and 192.168.200.0 not in CRs routing table? Karena semua lalu lintas dari jaringan 192.168.100.0 dan 192.168.200.0 akan menggunakan ISP1 sehingga kedua jaingan ini tidak terdapat di routing table ISP2

Step 5: Verify connectivity

Step 6: View BGP information on the ISP routers

Step 7: Reflection

Why doesn’t ISP1 advertise any networks to the customer router? Karena setiap jaringan sudah di atur menggunakan ISP yang mana, jadi tidak semua jaringan ynag ada di ISP1 di izinkan untuk menggunakan pelayanan router lainnya.